manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 200

5–84

Maintenance and Service Guide

Removal and Replacement Procedures

✎

The thermal pads and thermal paste should be thoroughly 
cleaned from the surfaces of the heat sink 

1

, 

2

, and 

3

 

and the 

system board components 

4

, 

5

, and 

6

, each time the heat sink 

is removed. Thermal pads and thermal paste should be installed 
on all surfaces before the heat sink is reinstalled. Thermal pads 
and thermal paste are included with all heat sink and system 
board spare part kits.

Thermal Pad and Thermal Paste Locations

Reverse the above procedure to install the fan/heat sink assembly.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands