HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 135

Page: 135 / 303

Removal and Replacement Procedures

Maintenance and Service Guide

5–19

5.9 Optical Drive

1. Prepare the computer for disassembly (

Section 5.3

2. Remove the Phillips PM2.5×8.0 screw

that secures the

optical drive to the computer.

3. Insert a thin tool, such as a paper clip

, into the media tray

release hole. (The optical drive media tray releases from the
optical drive.)

4. Use the media tray frame to slide the optical drive

out of

the computer.

Optical Drive Spare Part Number Information

DVD±RW/R and CD-RW Double-Layer Combo Drive
with LightScribe
DVD±RW/R and CD-RW Double-Layer Combo Drive
DVD/CD-RW Combo Drive

432973-001

432972-001
434673-001

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Search results

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz

Reviews:

Brands by name

Popular brands

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz

Reviews:

Brands by name

Popular brands