HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 203

Page: 203 / 303

Removal and Replacement Procedures

Maintenance and Service Guide

5–87

2. Turn the processor locking screw

one-half turn

counterclockwise until you hear a click.

3. Lift the processor

straight up and remove it.

✎

The gold triangle

on the processor should be aligned with

the triangle icon

embossed on the processor socket when

you install the processor.

Removing the Processor

Reverse the above procedure to install the processor.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Search results

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz

Reviews:

Brands by name

Popular brands

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz

Reviews:

Brands by name

Popular brands