manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 259

Backup and Recovery

Maintenance and Service Guide

B–7

✎

Microsoft Windows XP has its own built-in repair features, 
such as System Restore and driver roll-back capabilities. If you 
have not already tried these features, try them before using 
PC Recovery.

✎

PC Recovery only recovers software that was preinstalled at 
the factory. Software not provided with this computer must be 
reinstalled from the disc provided by the manufacturer or 
downloaded from the manufacturer's Web site.

Recovering from the Recovery Discs

To restore the system from the recovery discs:

1. Back up all personal files.

2. Insert the first recovery disc into the optical drive and restart 

the computer.

3. Follow the on-screen instructions.

Recovering from the Partition on the Hard Drive

You can perform a recovery from the partition on the hard drive 
from either the Start button or 

f11

.

To restore the system from the partition:

1. Access the PC Recovery tool:

❏

To access PC Recovery from the Start button, select 

Start > All Programs > System Recovery > 
PC Recovery

.

❏

To access PC Recovery from 

f11

, restart the computer and 

press 

f11

 while the “Press <F11> for recovery” message is 

displayed on the screen.

The PC Recovery tool opens.

2. Select 

PC Recovery

 and click 

Next

.

The computer restarts and the PC Recovery tool opens.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands