manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 266

B–14

Maintenance and Service Guide

Backup and Recovery

✎

Before reinstalling the program, be sure it is fully uninstalled.

Recovery Manager replaces corrupted system files and reinstalls 
deleted system files within the program.

■

In most cases, if the program you are reinstalling is still on 
your computer, the reinstallation process does not affect your 
personal settings.

■

In all cases, if a program has been deleted from your 
computer, the reinstallation process reinstalls the program or 
utility to the factory image but cannot restore your personal 
settings.

Reinstalling Preinstalled Programs and Drivers

1. Remove the program or driver:

✎

Before reinstalling the program, be sure it is fully uninstalled.

a. Select 

Start > Control Panel > Programs > Uninstall a 

program

.

b. Right-click the program or driver you want to remove, 

and then click 

Uninstall

.

2. Reinstall the program or driver:

a. Select 

Start > All Programs > Recovery Manager > 

Recovery Manager

.

Recovery Manager opens.

b. Click 

Advanced Options

.

c. Click either 

Software program re-installation

 or 

Hardware driver re-installation

, and then click 

Next

.

d. Follow the on-screen instructions.

e. Restart the computer if prompted.

Reinstalling Programs from Discs

1. Insert the disc into the optical drive.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands