manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 176

5–60

Maintenance and Service Guide

Removal and Replacement Procedures

2. Disconnect the Bluetooth module cable 

1

 from the 

system board.

✎

The Bluetooth module cable is included with the Bluetooth 
module spare part kit and is also included in the Cable Kit, 
spare part number 434677-001.

3. Route the Bluetooth module cable 

2

 under the system board.

4. Remove the two silver Phillips PM2.0×3.0 screws 

3

 that 

secure the Bluetooth module to the base enclosure.

5. Remove the Bluetooth module 

4

.

Removing the Bluetooth Module

Reverse the above procedure to install the Bluetooth module.

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands