manualshive.com logo in svg

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Share
Download
HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 198

5–82

Maintenance and Service Guide

Removal and Replacement Procedures

✎

The thermal pads and thermal paste should be thoroughly 
cleaned from the surfaces of the fan/heat sink assembly 

1

, 

2

, 

and 

3

, the system board components 

4

 and 

6

, and the 

processor 

5

 each time the fan/heat sink assembly is removed. 

Thermal pads and thermal paste should be installed on all 
surfaces before the fan/heat sink assembly is reinstalled. 
Thermal pads and thermal paste are included with all fan/heat 
sink assembly, system board, and processor spare part kits.

Thermal Pad and Thermal Paste Locations

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands