HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz Maintenance And Service Manual Download Page 167

Page: 167 / 303

Removal and Replacement Procedures

Maintenance and Service Guide

5–51

5. Turn the computer right-side up with the front toward you.

6. Disconnect the power button board cable

and the LED

board cable

from the low insertion force (LIF) connectors

to which they are connected.

7. Release the ZIF connector to which the TouchPad cable is

attached and disconnect the TouchPad cable

Disconnecting the Top Cover Cables

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz
















































































































































































































































































































Search results

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz

Reviews:

Brands by name

Popular brands

HP Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz, Maintenance And Service Manual

Search results

Summary of Contents for Dv9233cl - Pavilion - Core 2 Duo 1.66 GHz

Reviews:

Brands by name

Popular brands