manualshive.com logo in svg

HP Cluster Platform, Introduction Manual

The HP Cluster Platform Installation Manual is a comprehensive guide designed to assist users in seamlessly setting up and configuring their HP Cluster Platform. This manual is available for download, completely free of charge, from our manualshive.com. Obtain step-by-step guidance and valuable instructions, ensuring a hassle-free installation process.

Share
Download
background image

A Component Specifications

This appendix provides operating and performance specifications for core HP Cluster Platform
components. Specifications might change for individual components as products are improved.
Consult the user information for a specific components to obtain the latest specification and
operation restrictions.

A.1 HP Rack 10000 G2 Series and HP Rack 10000 Series Specifications

The following list provides links to the physical specifications, installation instructions, and latest
information available for the HP Rack 10000 G2 and HP Rack 10000 Series cabinets:
•

The HP Rack 10000 G2 Series website provides an overview of the various rack models and
a comparison of the latest models. For more information, go to:

http://h18004.www1.hp.com/products/servers/proliantstorage/racks/10000series-g2/
index.html

•

The HP Rack 10000 G2 Series QuickSpecs provide the latest specifications on the HP Rack
10000 G2 Series models. To access the QuickSpecs, go to:

http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html

•

The HP 10000 G2 Series Racks Manuals website provides information on how to install,
upgrade, and manage cables for these racks. For more information, go to:

http://h20000.www2.hp.com/bizsupport/TechSupport/
DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=135&prodTypeId=3447589&prodSeriesId=1155226

•

The HP Rack 10000 Series website provides an overview of the various rack models and a
comparison of the latest models. For more information, go to:

http://h18004.www1.hp.com/products/servers/proliantstorage/racks/10000series/index.html

•

The HP Rack 10000 Series QuickSpecs provides the latest specifications on the HP Rack 10000
Series models. To access the QuickSpecs, go to:

http://h18004.www1.hp.com/products/quickspecs/10995_div/10995_div.html

•

The HP Rack 10000 Series support and documents website provides more information on
how to install, upgrade, and manage cables for these racks. For more information, go to:

http://h18000.www1.hp.com/products/servers/proliantstorage/racks/10000series/
documentation.html

A.2 HP Modular Cooling System G2 Rack and HP Modular Cooling System

The following list provides links to specifications for both the HP Modular Cooling System (MCS)
and Modular Cooling System G2 Rack.
•

The HP Modular Cooling System G2 Rack overview website provides specifications, support
information, and key benefits of the rack. For more information, go to:

http://h10010.www1.hp.com/wwpc/us/en/en/WF05a/
3447589-3447589-3446285-3446371-3461917-3657806.html

•

TheHP Modular Cooling G2 QuickSpecs provides the latest specifications on the HP Modular
Cooling System G2. To access the QuickSpecs, go to:

http://h18004.www1.hp.com/products/quickspecs/12919_div/12919_div.html

•

The HP Modular Cooling System G2 Rack Manuals website has links to a user guide, setup
and installation guide, and service and maintenance information. Go to:

http://h20000.www2.hp.com/bizsupport/TechSupport/
DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=3447589&prodSeriesId=3657806

A.1 HP Rack 10000 G2 Series and HP Rack 10000 Series Specifications

77

Summary of Contents for Cluster Platform

























































































Reviews:

No comments

Related manuals for Cluster Platform

IBM 88632SU User Manual preview
88632SU
Brand: IBM Pages: 100
IBM xSeries 200VL Installation Manual preview
xSeries 200VL
Brand: IBM Pages: 70
Belkin F1UP0002 Quick Installation Manual preview
F1UP0002
Brand: Belkin Pages: 2
Fujitsu SPARC Enterprise M3000 Service Manual preview
SPARC Enterprise M3000
Brand: Fujitsu Pages: 202
Fujitsu SPARC Enterprise M4000 Service Manual preview
SPARC Enterprise M4000
Brand: Fujitsu Pages: 310
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual preview
SPARC Enterprise M3000
Brand: Fujitsu Pages: 560
Fujitsu SPARC Enterprise M4000 Installation Manual preview
SPARC Enterprise M4000
Brand: Fujitsu Pages: 76
Brother RuggedJet RJ-4040 Software Manual preview
RuggedJet RJ-4040
Brand: Brother Pages: 111
Brother HL-7050 Series User Manual preview
HL-7050 Series
Brand: Brother Pages: 253
HP AlphaServer ES47 Installation Manual preview
AlphaServer ES47
Brand: HP Pages: 76
HP AlphaServer GS80 Upgrade Manual preview
AlphaServer GS80
Brand: HP Pages: 88
HP 16-way Specification preview
16-way
Brand: HP Pages: 39
HP 16/18-Port Cable Management Kit Installation Manual preview
16/18-Port Cable Management Kit
Brand: HP Pages: 14
HP 11Q98EA#ABU User Manual preview
11Q98EA#ABU
Brand: HP Pages: 49
HP AlphaServer ES47 Cli Reference Manual preview
AlphaServer ES47
Brand: HP Pages: 152
HP AlphaStation DS20 Specifications preview
AlphaStation DS20
Brand: HP Pages: 15
HP AlphaServer ES45 Overview preview
AlphaServer ES45
Brand: HP Pages: 38
HP AB500A - Integrated Lights-Out Advanced Technology Brief preview
AB500A - Integrated Lights-Out Advanced
Brand: HP Pages: 43

Brands by name

Popular brands

Load more brands