HP Cluster Platform, Introduction Manual

Page: 28 / 88

2.3 HP 10000 Series Racks
The HP 10000 Series racks (see Figure 2-4 ) used in HP Cluster Platform are either 42U (78.838
inches) or 22U (43.838 inches) high, depending on the configuration requirements. The HP 10000
Series racks house the components on industry-standard 19-inch wide rails. The HP 10000 Series
racks have interchangeable perforated front and rear doors, a set of side panels for each row of
bayed racks, and can have up to four PDUs.
Table 2-3 lists the callouts and dimensions shown
in Figure 2-4 of the racks used in HP Cluster Platform configurations.
Figure 2-4 42U HP 10000 Series Rack
1
2
3
4
6
5
Table 2-3 HP Rack 10000 Series Rack Callouts and Dimensions
42U Wide Cabinet (See
Section 2.3.1 )
42U 22U Callout Numbers — Descriptions
815.47 mm 612.77 mm 612.77 mm 1 — Rack width (with side panels)
2002.50 mm 2002.50 mm 1113.48 mm 2 — Rack height
735.3 mm 535.3 mm 535.3 mm 3 — Foot width
885.3 mm 885.3 mm 885.3 mm 4 — Foot depth
Quantity four (4) 5 — Rotating Casters
Quantity four (4) 6 — Leveling Foot
2.3.1 HP Rack 10000 Series Wide Cabinet
For cluster configurations using the 288-port Voltaire InfiniBand interconnect, an HP 10000 Series
42U, 800 mm wide cabinet is required (see
Figure 2-4 and Table 2-3 ). The added width allows
28 Platform Core Components