HP C4405A - Colorado 14GB Tape Drive User Manual Download Page 3 | Manualshive

Page: 3 / 95

background image

HP Colorado Backup II — Software License Agreement

iii

OWNERSHIP.

The Software is owned and copyrighted by HP or its third party suppliers. Your

license confers no title or ownership in the Software and is not a sale of any rights in the
Software. HP's third party suppliers may protect their rights in the event of any violation of these
License Terms.

COPIES AND ADAPTATIONS.

You may only make copies or adaptations of the Software for

archival purposes or when copying or adaptation is an essential step in the authorized Use of the
Software. You must reproduce all copyright notices in the original Software on all copies or
adaptations. You may not copy the Software onto any bulletin board or similar system.

NO DISASSEMBLY OR DECRYPTION.

You may not disassemble or decompile the Software

unless HP's prior written consent is obtained. In some jurisdictions, HP's consent may not be
required for limited disassembly or decompilation. Upon request, you will provide HP with
reasonably detailed information regarding any disassembly or decompilation. You may not
decrypt the Software unless decryption is a necessary part of the operation of the Software.

TRANSFER.

Your license will automatically terminate upon any transfer of the Software. Upon

transfer, you must deliver the Software, including any copies and related documentation, to the
transferee. The transferee must accept these License Terms as a condition to the transfer.

TERMINATION.

HP may terminate your license upon notice for failure to comply with any of

these License Terms. Upon termination, you must immediately destroy the Software, together
with all copies, adaptations and merged portions in any form.

EXPORT REQUIREMENTS. You may not export or re-export the Software or any
copy or adaptation in violation of any applicable laws or regulations.

U.S. GOVERNMENT RESTRICTED RIGHTS.

The Software and any accompanying documentation have been developed
entirely at private expense. They are delivered and licensed as “commercial
computer software” as defined in DFARS 252.227-7013 (Oct 1988), DFARS
252.211-7015 (May 1991) or DFARS 252.227-7014 (Jun 1995), as a “commercial

«
1
2
3
4
5
...
»

Summary of Contents for C4405A - Colorado 14GB Tape Drive
































































































Reviews:

No comments

Related manuals for C4405A - Colorado 14GB Tape Drive

Brand: Harris Pages: 76

StoraXe PowerBooster GSS0608

Brand: ADS-tec Pages: 140

TOWERRAID TR5M1

Brand: Sans Digital Pages: 82

Brand: IBM Pages: 16

Brand: Compaq Pages: 157

DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116

Brand: USP Pages: 79

Brand: LaCie Pages: 2

Brand: Silverline Pages: 2

Brand: Argus Pages: 24

Brand: morse Pages: 7

Brand: Lakeshore Pages: 7

Brand: Viking Pages: 33

Garage Workshop T3

Brand: Stanley Pages: 16

Brand: Roland Pages: 2

Brand: G-Technology Pages: 24

Brand: Karibu Pages: 41

Brand: ramia Pages: 6

WD1003FBYX - RE4

Brand: Western Digital Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands