HP C4405A - Colorado 14GB Tape Drive User Manual Download Page 16

Page: 16 / 95

Getting Started

Selection Panes

Drives and files are selected the same way in HP Colorado Backup IIas they are
in Windows Explorer. Selection panes are used to select and deselect drives,
folders, and files for backup and restore.

The two sections of the selection panes are:

Deselect one or more highlighted drives, folders, or files, and
remove the check marks next to them.

Open the Restore File Version dialog box to choose the spe-
cific version of a file you want restored.

Open the File Find dialog box to find a file for restore. You
can search by name, location, or date modified.

Open the Backup Wizard, which leads you step-by-step
through the selection of files, settings, and options for your
backup.

Open the Restore Wizard, which leads you step-by-step
through the selection of files, settings, and options for your
restore.

Open the Job Options dialog box, where you can select
options for the current backup job.

Display your files as small icons in vertical rows (List View).

Display your files in a vertical list with file size, type, and mod-
ified date (Detail View).

Display a short description of menu items, windows, buttons,
and boxes when the item is clicked.

Click:

To do this:

Summary of Contents for C4405A - Colorado 14GB Tape Drive
































































































Search results

Summary of Contents for C4405A - Colorado 14GB Tape Drive

Reviews:

Related manuals for C4405A - Colorado 14GB Tape Drive

Brands by name

Popular brands

HP C4405A - Colorado 14GB Tape Drive, User Manual

Search results

Summary of Contents for C4405A - Colorado 14GB Tape Drive

Reviews:

Related manuals for C4405A - Colorado 14GB Tape Drive

Brands by name

Popular brands