HP C4405A - Colorado 14GB Tape Drive User Manual Download Page 64

Page: 64 / 95

Using Restore

■

List warnings reported while restoring files

—Includes a list of any warnings

encountered while restoring files.

■

List unattended messages and prompts

—Includes a list of any messages

and prompts encountered while performing an unattended restore.

■

Show report summary

—Includes a report summary of the results of the

restore.

Unattended restore

Check

Unattended restore

to run unattended restore jobs. This option enables

the program to bypass most prompts during a restore operation.

Unattended

restore

is the default setting.

Advanced Tab

Use the Advanced tab to specify whether or not to restore the Windows
Registry.

■

Restore Windows Registry

—Restores the Windows Registry.

■

Restore NTFS File Permissions

—Restores user’s permissions to files and

directories.

Note:

If you are running under Windows 9x, the

Restore NTFS File

Permissions

option will not be available.

To set the Advanced Options:

Click the

Advanced

tab in the

Restore Options

dialog box.

Summary of Contents for C4405A - Colorado 14GB Tape Drive
































































































Search results

Summary of Contents for C4405A - Colorado 14GB Tape Drive

Reviews:

Related manuals for C4405A - Colorado 14GB Tape Drive

Brands by name

Popular brands

HP C4405A - Colorado 14GB Tape Drive, User Manual

Search results

Summary of Contents for C4405A - Colorado 14GB Tape Drive

Reviews:

Related manuals for C4405A - Colorado 14GB Tape Drive

Brands by name

Popular brands