HP Brio BA210 User Manual Download Page 44

Page: 44 / 102

PC Displays an Error at Startup

Keyboard Test Error

Have you checked that...

How

The keyboard cable is correctly connected

Switch off the PC.

Plug the cables into the correct connectors on
the back of the PC (you may have problems if
you connect the mouse to the keyboard
connector).

The keyboard is clean and keys are not stuck
down

Check all keys are at the same height, and none are
stuck (keyboard)

The keyboard is working

Switch off the PC.

Replace the keyboard by a known working unit.

Switch on the PC, and check it works.

Run DiagTools. Refer to page 42.

The keyboard port is working

Disconnect the keyboard from the PC.

Attach the keyboard to another PC of the same
model.

If the keyboard works you may need a new
system board. Contact your authorized support
provider.

You are using the latest BIOS for your PC

Download the latest BIOS and instructions for its
installation from HP’s Web at:

www.hp.com/go/briosuppor

If the problem persists, contact your authorized support provider

Summary of Contents for Brio BA210







































































































Search results

Summary of Contents for Brio BA210

Reviews:

Related manuals for Brio BA210

Brands by name

Popular brands

HP Brio BA210, User Manual

Search results

Summary of Contents for Brio BA210

Reviews:

Related manuals for Brio BA210

Brands by name

Popular brands