HP Brio BA210, User Manual

Page: 34 / 102

Hardware Problems
26
There’s a Problem with the Floppy Drive
Have you checked that... How
You are using a formatted diskette and it is inserted
correctly You will receive an on-screen error if the
diskette is not properly formatted
The floppy is clean Use a diskette cleaning kit (see your PC
dealer)
The
Setup
program is correctly configured for your
floppy drive
Enter the
Setup
program by pressing
F2
at
startup, then:
• Go to the Advanced menu. Make sure
you have enabled
Floppy Disk
Controller .
• Go to the Main menu. You should see
1.44 M, 3.5 in
.... in the
Legacy Diskette
A field.
The hardware is working properly Run DiagTools to see if it detects a problem
with the floppy drive (refer to page 42)
Advanced Troubleshooting
The drive’s power and data cables are correctly
connected Check that the drive’s power and data cables
are correctly connected at both ends (floppy
drive and system board). Refer to page 55 for
connections to the floppy drive and page 53
for connections to the system board.