HP Brio BA210 User Manual Download Page 59

Page: 59 / 102

Removing the Cover and Front Panel

Removing and Replacing the Front Panel

To Remove the Front Panel

With the cover removed, press in the two plastic clips on one side of the
panel until the panel begins to come off.

Press in the two plastic clips on the other side of the panel until the
panel is completely free.

Carefully remove the status panel connector connected from the rear of
the front panel.

Lay the front panel on a flat surface beside the PC.

To Replace the Front Panel

Reconnect the status panel connector to the rear of the panel, taking
care to connect it the right way round.

Insert the two plastic clips on one side of the panel then snap the panel
into place.

Note

If the PC does not start properly or will not start at all, you may have reconnected the status
panel connector wrongly. Remove the front panel and check the connection of the cable.

status panel
connector

Summary of Contents for Brio BA210







































































































Search results

Summary of Contents for Brio BA210

Reviews:

Related manuals for Brio BA210

Brands by name

Popular brands

HP Brio BA210, User Manual

Search results

Summary of Contents for Brio BA210

Reviews:

Related manuals for Brio BA210

Brands by name

Popular brands