HP Brio BA210 User Manual Download Page 71

Page: 71 / 102

Replacing the Power Supply Unit

WARNING

Hewlett-Packard does not support power supply upgrades. This information is
provided to help you replace a defective power supply unit. For your safety, only
replace with a power supply provided by HP support services.

To avoid electrical shock, do not open the power supply. There are no user-serviceable
parts inside.

Switch off the PC.

Remove the PC’s cover. Refer to page 49.

Remove the three screws from the rear of the PC.

Disconnect all power cables from installed drives and from the system
board.

Lift the power supply unit out of the PC.

Place the new power supply unit inside the computer and tighten the
three screws on the rear of the PC.

Reconnect all the power cables to the drives and the system board.

Replace the cover. Refer topage 51.

Check that the voltage switch is set correctly for your country (the
voltage is set during manufacturing and should already be correct).

Summary of Contents for Brio BA210







































































































Search results

Summary of Contents for Brio BA210

Reviews:

Related manuals for Brio BA210

Brands by name

Popular brands

HP Brio BA210, User Manual

Search results

Summary of Contents for Brio BA210

Reviews:

Related manuals for Brio BA210

Brands by name

Popular brands