8 | Operation
80
60084498 • 01 • 06/2022 • en
1
2
3
1
2
3
Example: Setting rod with aluminium clips on the packer
Increasing the working depth
4. Slightly lift the machine.
5. Remove clips from the area (1).
6. Lower the machine.
7. Plug on clips again in the area (2).
Reducing the working depth
8. Lower the machine.
9. Remove clips from the area (2).
10. Lifting the machine.
11. Plug on clips again in the area (1).
ⓘ
With the cylinders fully extended (no clips in area (2)) the coulters will just touch
the ground.
Adjustment to working depth
12. Observe the ratio of 1 : 2.5.
Example:
For a desired working depth of approx. 10 cm insert the clips with a total
thickness of 4 cm in each case in area (2).
13. During work in the field increase or reduce the working depth as required.
14. In the field lower the machine and raise the undercarriage. Now switch the
control device
Lift/Lower
to the floating position.
Summary of Contents for Terrano 4.3 GX
Page 2: ......
Page 111: ...60084498 01 06 2022 en 111 Notes...
Page 112: ...112 60084498 01 06 2022 en...
Page 113: ......
