horsch Terrano 4.3 GX Operating Instructions Manual Download Page 34

Page: 34 / 114

5 | Attachment

60084498 • 01 • 06/2022 • en

NOTE

The machine is operated with mineral-based hydraulic oil.
Do not mix mineral oils with organic or ester oils.
The hydraulic circulation of the tractor or the hydraulic unit must contain min-
eral-based hydraulic oil.

Oil purity acc. to ISO 4406: 18/16/13

Always plug in all hydraulic lines!
Otherwise components may get damaged because of interrelated functions.

Ensure cleanliness and tight fit of all plug-and-socket connections!

Observe the notes on hydraulics and pressure accumulator in chapter

Safety

and responsibility

5.2.1 Marking of hydraulic hoses

Symbols on the handles of the hydraulic couplings indicate the function of the re-
spective hoses:

Undercarriage

Lift/lower

Summary of Contents for Terrano 4.3 GX



















































































































Search results

Summary of Contents for Terrano 4.3 GX

Reviews:

Brands by name

Popular brands

horsch Terrano 4.3 GX, Operating Instructions Manual

Search results

Summary of Contents for Terrano 4.3 GX

Reviews:

Brands by name

Popular brands