horsch Terrano 4.3 GX, Operating Instructions Manual

Page: 76 / 114

8 | Operation
76 60084498 • 01 • 06/2022 • en
The machine can be parked in a hall or under a roof either folded or unfolded.
Park the machine as low as possible when folded.
In case of longer parking periods, preferably park the machine unfolded on the
packer to prevent damage to the tyres.
1. Position the machine at a suitable location and set the tractor brake.
2. Lift the machine.
3. Unfold the machine, if necessary, (see Unfolding section).
4. Switch off the traction intensifier with the lock valve (position "0"– see Trac-
tion intensifier section).
5. Unfold and secure the support.
6. Lower the machine to the support.
Machines with drawbar eye or ball head:
• Lower the machine on the support using the hydraulic cylinder of the drawbar.
• Close the lock valve on the hydraulic hose for the drawbar cylinder.
7. Tighten the parking brake (option).
8. Secure the machine with wheel chocks against rolling away. Position the
wheel chocks under the side of the undercarriage wheels pointing to the
downward slope.
9. Unplug the brake lines, ISOBUS and lighting and hook in the bracket.
Attach the cover caps if so equipped.
10. Unhitch the machine.
Machines with tractor link arm:
• Release the securing device of the catching hooks.
• Lower the tractor link arm.
Machines with drawbar eye:
• Open the lock valve on the hydraulic cylinder of the drawbar.
• Position the drawbar with the hydraulic cylinder of the drawbar to release the
bolt.
• Release the bolt and move the machine to clear.
• Close the lock valve on the hydraulic cylinder of the drawbar.
Machines with ball and socket coupling:
• Open the lock valve on the hydraulic cylinder of the drawbar.
• Release the hold-down.
• Lift the drawbar or spherical cap with the hydraulic cylinder of the drawbar until
the ball has cleared.
• Close the lock valve on the hydraulic cylinder of the drawbar.
11. Depressurise the hydraulic lines and disconnect them.
12. For pneumatic brake systems:
Drain air reservoir.
13. Machines with drawbar eye or ball-and-socket coupling:
Attach the immobiliser and secure with the padlock.