Assembly groups | 6
60084498 • 01 • 06/2022 • en
49
1. Loosen the screws.
2. Depending on the required angle of attack (1), position the upper screw in one
of the 3 holes (2).
3. Tighten the screws.
4. Adjust all levelling discs equally.
Adjusting the border disc
1
2
Border disc
1 Border disc
2 Bolt and cotter pin
The width of the border discs can be adjusted in 4 positions.
During use the discs can be pushed in, e.g. at the field boundary.
1. Loosen bolt and cotter pin.
2. Adjust position of the border disc.
3. Secure setting with bolt and cotter pin.
Cleaning
NOTE
When cleaning the parts with high pressure cleaner, make sure
not
to direct the
water jet to the bearing points.
Seals and bearings are not waterproof under high pressure!
Summary of Contents for Terrano 4.3 GX
Page 2: ......
Page 111: ...60084498 01 06 2022 en 111 Notes...
Page 112: ...112 60084498 01 06 2022 en...
Page 113: ......
