horsch Terrano 4.3 GX, Operating Instructions Manual

Page: 59 / 114

Optional equipment | 7
60084498 • 01 • 06/2022 • en 59
WARNING
Danger of traffic accidents!
Ø
Maintenance and adjustment tasks on the brake are workshop work and may
only be carried out by qualified personnel! Refer to the pertaining
HORSCH
Service instructions .
Ø
Changes to the pressure setting cause changes in the response characteristics
of the brake system.
Ø Reducing or increasing the pressure ratio may cause a marked change of the
braking power, depending on the extent.
NOTE
For machine with road approval, changes to the pressure settings may void the re-
gistration!
Ø
Observe the data of the vehicle registration.
Releasing the brake The brake of the parked machine can be released manually on the brake valve unit.
This is only possible if adequate air is present in the air vessel to open the spring ac-
cumulator.
DANGER
Uncontrolled rolling of the machine may cause severe injuries by
crushing or rolling over.
Ø Park the machine only on level ground with sufficient load bearing capacity.
Ø
Secure the machine with wheel chocks against rolling before releasing the
brake.
1. Press the button (5) to release the brake or pull it out to apply the brake.
2. Push the button (6) to release the parking brake.
NOTE
Ø
Before parking the machine engage the parking brake again.