horsch Terrano 4.3 GX, Operating Instructions Manual

Page: 66 / 114

7 | Optional equipment
66 60084498 • 01 • 06/2022 • en
Setting
The crossbar is adjusted purely mechanically via the hole pattern.
1. Remove the cotter pin and pull out the bolt.
2. Adjust the desired inclination. The higher the hole is chosen, the more intens-
ive do the tines work.
3. Insert the bolt again and secure it with the cotter pin.
Adjustment on the hole pattern
The angled plate can be adjusted to the intended intensity.
In case of wear it can be renewed or readjusted.
Wearing plate
CAUTION
Exceeding the permissible transport width. Risk of damages.
Ø Swing the crossbar fully up before transport travel.
7.5 Fertiliser distributor
Tillage and fertilising can be combined by using the fertiliser distributor.
It mainly consists of the distributor tower, the hose system and the fertiliser tubes on
the tine bars.
The supply is provided via a separate fertiliser hopper.