MAN1106-07-EN_XL+_UserManual
M a y 6
t h
, 2 0 2 0
P a g e 86 | 192
8.8 Universal Analog Inputs Model 5
NOTE: See the data sheet for the XL+ OCS model being used for jumper settings, and see the
appropriate pages in this manual (see
) for details on how to use Cscape to configure the
digital filtering,
The universal analog inputs provide a high resolution, very flexible interface for a variety of
analog inputs. These inputs include voltage, current, thermocouple, RTD, and millivolt. Each
channel can be configured separately using jumpers and configuration settings in Cscape.
Like the standard analog inputs, these inputs have a digital filter that can be used to filter
electrical noise that may be unavoidable in some installations. The downside to digital filtering
is the inputs will respond more slowly to sudden changes in the actual input.
8.9 Universal Analog Inputs
Universal Analog Inputs
The Universal Analog Inputs on the Model 6 IO board are unique from other Horner XL-series
input/output cards in that they are configurable through the module configuration instead of
having to change jumper settings in order to setup the input type. To configure the Universal
Analog input type:
1)
Select Analog In to access the Analog Input Configuration menu.
2)
Select any of the Analog input types from the dropdowns by clicking the down arrow
beneath each corresponding Channel, as seen below:
3)
Figure 8.8
–
Analog Input Configuration Screen
