MAN1106-07-EN_XL+_UserManual
M a y 6
t h
, 2 0 2 0
P a g e 80 | 192
Figure 8.2
–
XL+ I/O Cover Removed (sample I/O board)
Once the back is removed, the jumper selection can be changed. The jumper settings are
documented on each data sheet using a diagram such as the figure below and a description of
the jumper settings.
Figure 8.3
–
Example Jumper Diagram
To re-install the cover, place the I/O cover back on the unit.
Place the screw back into the hole and turn the screw slowly counter clockwise until it clicks
into the threads. This prevents the screw from being cross-threaded. Now turn the screw
clockwise until the cover is firmly secured. Repeat this process for all four (4) screws.
Ensure not to exceed the recommended max torque of 7-10 in-lbs [0.8
–
1.13 Nm].
J1
J2
J3
JP3
JP1
001XLE005-R1
J4
