37
Operating Procedures
2-11
When Not Using the KTU-35 Cross Folder
0
1
Delivery
Cross
Folding
This section explains the set up procedures
when not using the KTU-35 Cross Folder.
Set the Knife ON/OFF switch.
- Turn off the Knife ON/OFF switch.
Knife ON/OFF Switch
Remove the stoppers.
- Remove all stoppers.
Put any removed stoppers on the bar next to the motor
bracket.
Removed Stopper
Move the delivery section brush to the
side of the delivery as shown in the
figure below.
Delivery Section Brush
Attach the delivery conveyor to the side
of the delivery.
- Reattach the conveyor to the delivery. See the
conveyor installation procedure on page 71.
- Raise the conveyor. See the conveyor installa-
tion procedure on page 71.
When Not Using the KTU-35 Cross Folder
Motor Bracket