63
Installation
Attach the blower air hose to the nipple
under the feed table.
1) Insert the blower air hose through the hole in
the feed table.
2) Attach the hose to the nipple using the hose
clamp.
Attach the air hose for the rear blower.
- Connect the rear blower air hose to the nipple
under the feed table.
- Attach the hose using the hose clamp.
Attach the gate plate to the main part of
the machine.
- Attach the gate plate by tightening the gate
plate side locking screw.
Attach the feed table to the main part of
the machine.
- Hook the four slots on the feed table over the
two projections and over the shaft at the end of
the main part of the machine.
Slip the belt over the pulley under the
feed table.
- The belt is attached to the feed table.
Install the hose to the feed rotor shaft
under the feed table.
5-4
Installing the Feed Section
Feed
Table
Slot
Projection
Feed Rotor Shaft
Hose
Gate Plate
Hose
Nipple
Pulley
Belt
Rear Blower Air Nozzle
Gate Plate Side
Locking Screw
Hose Clamp
Hose Clamp
Shaft
Blower Air
Hose
Hose Clamp
Hole
Installing the Feed Section
