11
Operating Procedures
1. Check the fold pattern (p.12)
Set each part
2. Setting the buckle plate (p.14)
3. Setting the gap adjusting levers (p.15)
4. Setting the gate plate (p.16)
5. Setting the feed table (p.16)
10. Start the folding operation (p.25)
*Offset the sheets using the ED-354 standing
delivery (P.26)
*Cross folding with the KTU-35 cross folder
(P.27)
9. Selecting the operation mode (p.23)
Setup Procedure
2. Operating Procedures
This chapter explains how to set and adjust each part before operation,
and lists the operation procedures. Refer to this chapter when changing
the sheets, fold pattern, or the operation mode.
WARNING
- There are rotating rollers inside this
unit. Be careful not to catch your
hair or clothing. Otherwise, the
machine can cause severe personal
injury.
- Keep your hands and fingers away
from moving parts of the machine.
Otherwise, the machine can cause
severe personal injury.
2-1
Setup Procedure
6. Setting the delivery section (p.18)
7. Adjusting the feeding operation (p.20)
8. Setting the control panel (p.22)
10
2
6
9
4
7
5
3
8
(4) Number of sheet to pinch
(1) Fold Type
1
1
1/2
of the sheet
2
2
1/2
1
1/2
2
1/4
1
1/2
3
1/4
3
4
5
1
1
2
2
2
1
2
2
2
2
1
2
2
4
4
1
4
2
4
4
(2) Buckle Plate
Number
(3) Stopper Position
way
Single Fold
Double Parallel Fold
1
1/3
3
1/3
1
2/3
2
1/3
1
3/4
2
1/4
4
1/4
1
1
3
1
4
1
2
1
3
3
1
1
3
3
3
Letter Fold
Roll Fold (three times)
1
Two ways to fold ( and )
1
2
1
2
2
2
2
1
1
1
1/3
2
1/3
1
2/3
3
1/3
1
1
2
3
3
1
3
1
3
3
Accordion Fold
1
Two ways to fold ( and )
1
2
Two ways to fold ( and )
1
2
Two ways to fold ( and )
1
2
One way to fold ( )
1
1
Power Switch
