47
Troubleshooting
The buckle roller gap is too narrow.
Increase the number of the sheets
when setting gap adjusting lever 2.
36
The sheets are not flat because of
humidity.
Straighten the sheets before
beginning the folding operation.
-
The plastic balls are stained.
Clean the plastic balls.
-
The steel balls are touching the sheet
when the sheet is touching the stoppers.
Change the steel balls to plastic
balls, or remove the steel balls.
32
The deflector is not set correctly.
Set the deflector correctly.
35
The buckle plate is set diagonally to the
machine.
Set the buckle plate correctly.
35
Either or both sides
of the fold line are
bent.
Cause
Remedy
Reference
Symptom
The sheet is
wrinkled.
The sheet is stained.
3-5
Problems With Fold Quality When Using Cross Folder
Problems With Fold Quality When Using Cross Folder
If the problem can not be solved by following the procedures listed above,
there may be mechanical damage inside the machine. Please call your local
dealer.
3-6
Other Problem
Counter does not
indicate the number
properly.
Battery is worn.
Replace the battery. Life of the
battery is about 10 years
58
Cause
Remedy
Reference
Symptom
