71
Installation
Remove the delivery conveyor from the
EF-354 and attach it to the KTU-35.
1) Remove the shaft (with the delivery rollers
and delivery guides) from the EF-354 con-
veyor bracket and attach it to the KTU-35.
5-8
Installing the Optional Cross Folder
White Connector
Position for mounting
the pump circuit breaker
Shaft
Delivery Rollers
Delivery Guides
2) Remove the delivery conveyor and remove
the brackets from the delivery conveyor.
Do not lose the mounting screws. They are necessary
for the next step.
3) Attach the conveyor bracket mentioned in
step 1) to the delivery conveyor using the two
mounting screws removed in step 2) and
install the delivery conveyor using the two
mounting screws.
Conveyor Bracket
4) Attach the conveyor leg (accessory) to the
KTU-35 using the four mounting screws.
Installing the Optional Cross Folder
Bracket
[EF-354 Accessories]
Mounting
screw of
Bracket
Mounting screw of
Delivery Conveyor
Mounting Screws
Connect the wires from the circuit
breaker for the pump.
- Plug in the white connector to the KTU-35 as
shown in the figure below.
If you first bought the EF-354 separately, the pump
circuit breaker is not located on the KTU-35. Reposi-
tion the pump circuit breaker from the EF-354 to the
KTU-35.
