![background image](http://html1.mh-extra.com/html/horiba/lo-300/lo-300_instruction-manual_2162291021.webp)
Overview
7
Monitoring display and current output
Table 3 shows the monitor display and current output of the detector (when the detection level
is set to 13 mA).
Table 3 Monitor display and current output (reference)
Detector status
Monitor display
Current output
Monitoring
status
Status
Level
Multi-Trans OFF
Multi-Trans ON
Normal
NORMAL RUN
10 mA to 12 mA 10 mA to 12 mA 10 mA to 12 mA
Continues
monitoring
Warning
WARNING
13 mA or more
13 mA or more
21 mA or more
Alarm
ALARM
13 mA or more
13 mA or more
21 mA or more
Detection level
error
No water
(Reflection-less)
With reflection-less
object such as debris
LOW
LEVEL
4 mA to 5 mA
4 mA to 5 mA
3 mA
Continues
monitoring
With high reflective
material as foiled
aluminum
HIGH
LEVEL
20 mA or more
20 mA or more
Inst
rum
e
nt
error
Motor rotation error
SYSTEM
ERROR
No display
4 mA
3 mA
Stops
monitoring
Laser luminescence
stop
Temperature error
Laser module
deterioration
REPLACE
LASER
MODULE
Displays
detection level
Outputs detection level
Continues
monitoring
The values shown above are for reference, and may vary depending on the customer's installation environment.
Time difference may occur between the monitor display and the current output.
In the factory default setting, the Multi-Trans function is set to OFF.
Refer to “ Multiplex transmission function ” (page 11).
Summary of Contents for LO-300
Page 1: ...Laser scanning type surface oil detector LO 300 Instruction Manual CODE GZ0000312982B...
Page 12: ......
Page 80: ......