Operation
52
Forcible output of contact
This screen enables to manually switch the contact output condition.
The contact output condition is held as entering into this screen.
Fig. 52 Forcible output of contact screen
Name
Description
SYSTEM ERR.
Touching this button enables to switch the system error contact output condition.
Current output condition is displayed at the right side of screen.
Note: The system error contact output for example NC-CO is selected outputs
approx. 5 seconds delayed after an error is detected to avoid erroneous action.
ALARM
Touching this button enables to switch the oil film alarm contact output condition.
Current output condition is displayed at the right side of screen.
WARNING
Touching this button enables to switch the oil film alarm contact output condition.
Current output condition is displayed at the right side of screen.
Note: This button will be displayed when the extended functionality module
(option) is attached.
Summary of Contents for LO-300
Page 1: ...Laser scanning type surface oil detector LO 300 Instruction Manual CODE GZ0000312982B...
Page 12: ......
Page 80: ......
