horiba LO-300, Instruction Manual

Page: 48 / 81

Operation
34
Operation
Select the item to be set from the set menu, and perform operation on the corresponding
screen.
On the set menu, the oil film monitoring stops, and the latest contact output operation is
maintained. When returning from the set menu screen to the monitor screen, the contact
output is reset.
Ensure to return to the monitor screen after completing the work. The oil film monitoring
restarts after leaving the set menu.
If there is no operation over 10 minutes, the screen automatically returns to the monitor
display. At this time, any setting change that registration has not been completed will become
invalid. For the operations on screens, refer to “ Touch panel operation ” (page 20), and for the
messages, refer to “ Message list ” (page 58).

Set menu
Touching [MENU] on the monitor display will display the following set menu.

Set menu (1/2)
Fig. 26 Set menu (1/2)
Name Description
OIL LEVEL Displays “ Detection level setting ” (page 35).
AREA LEVEL Displays “ Detection area setting ” (page 36).
CONT.TIME Displays “ Continuous judgment time setting ” (page 37).
RELAY OUT Displays “ Contact output setting ” (page 38).
LEVEL ERR. Displays “ Lower limit error judgment setting ” (page 38).
MULTI-TRANS Displays “ Multiplex transmission function setting ” (page 39).
NEXT Displays “ Set menu (2/2) ” (page 35).
ESC Returns to “Monitor display”.
Software version