horiba LO-300, Instruction Manual

Page: 29 / 81

Overview
15
Note

Contact us when the message of [RTC ERROR] is displayed in the column of the date and time.

Refer to “ Automatic back light OFF function ” (page 11) for turning OFF the automatic back light.
Automatic restoration by no operation
The oil film monitoring stops while setting or in the Test mode.
It automatically returns to the state of oil film monitoring when there is no operation of setting or
on the Test mode screen for ten minutes or more.

Error message at startup
Unexpected failure may occur when the following message is displayed at startup. In this case,
contact us.
“Factory preset data is not available.
PLEASE CONTACT TO YOUR LOCAL AGENT.”
Tip
During the following status, the back light does not turn OFF automatically. Also, when the following
status occurs while turning OFF the back light, the back light automatically lights up.

Oil film warning/oil film alarm occurs

Instrument error occurs

Upper limit error/lower limit error occurs

Laser replacement message is being displayed