background image

NM-POCL

AMP

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Power over Coax Camera

NM-POCLAMP

Indoor/Outdoor Weather Resistant

MAN-POCLAMP     REV0703A

Elbow Bracket

Adjusts camera angle at base, 

screw, and housing.

Camera Lens

Factory set - rotates in either 

direction to adjust focus.

Camera Bracket

Slot indicates image bottom.

Base, Gasket & Screws

Mount to round 4” junction box.

F-Connector

Transmits both power and video 

across a single coax.

Housing Cap

Provides access to camera.

Locking Ring

Secures elbow bracket to 

base at desired position.

Product Includes:

1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket, 
    Locking Ring, Base, Gasket, PoC Video Encoder, F-Connector). 
2. NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.

PoC Video Encoder

Built into camera - exchanges 

power and video with Decoder for 

One Wire Video™ on coax cable.

Housing

NM-POCLAMP-B

NM-POCLAMP-C

Ivory 

NM-POCLAMP-H

Available in Ivory Color Only:

B/W camera          Color camera       Day/Night Color     Housing

B/W

Color

Day/Night

 Color

Power Input

Connects to 24V DC wall 

transformer (included) 

and AC outlet.

F-Connector

Connects to camera 

F-Connector with a single 

coax such as RG6. 

RCA Video Out

Connects to viewing 

device such as monitor, 

DVR, TV, or modulator.

PoC Video Decoder (Included)

This general purpose surveillance camera utilizes a built-in NetMedia Power over Coax (PoC) Video Encoder and external 

PoC Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple 

cables to the camera location! It mounts to a typical round 4 inch junction box and is viewed with a security monitor or 

television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.

PoC Video Encoder built into camera
Includes PoC Video Decoder module
One Wire Video™ Installation
Uses one coax cable to camera
Excellent image quality
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty

FEATURES

Camera Lens: 

 

Image Sensor: 
Resolution: 
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:     

 

Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
PoC Decoder Video Output:
PoC Decoder Video Output Connector:
PoC Decoder Power Input:
PoC Decoder Power Connector: 
PoC Decoder Size:
PoC Decoder Weight:
Housing Size:   
Base Size:   

 

Base Mounting Holes: 
Assembly Weight:

Female F-Connector

Coax: RG6 quad shield recommended

Up to 100’

Proprietary

Composite

Female RCA

  24V DC, 200mA

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3 oz.

3.13” dia. x 4” long

4.5“ dia., 0.75” high, 0.5“ hole

3.5” centers

1 lb.

(subject to change without notice)

SPECIFICATIONS

B/W

Color

    Day/Night Color

3.6mm

1/3” CCD

350 lines

72˚ Horizontal

0.7 Lux F2.0

Yes

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

470 lines

72˚ Horizontal

0.3 Lux F1.2

Yes

Summary of Contents for NM-POCLAMP

Page 1: ...oax PoC Video Encoder and external PoC Video Decoder to exchange power and video across a single coax cable such as RG6 There is no need to run multiple cables to the camera location It mounts to a typical round 4 inch junction box and is viewed with a security monitor or television To view the camera on a single standard television use the TV s composite RCA Video Input jack PoCVideo Encoder buil...

Page 2: ...e camera and Video Decoder Each Camera Decoder pair needs a dedicated point to point wiring circuit Do not connect the Camera Decoder coax to video distribution equipment Doing so could damage this product and or the other attached devices 2 Connect a video cable from the viewing device monitor Quad DVR modulator etc to the Decoder s RCA Video Out Connector Simple adapters such as RCA to BNC may b...

Page 3: ... all installation instructions could void your FCC authorization to use the product in the USA Security Cameras FCC compliance requires that the Camera lens cover and Video Decoder module end caps be fastened whenever the unit is in operation NOTE This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part15 of the FCC rules These limits are des...

Page 4: ...e overexposed In addition cameras that are designed for low light or infrared sensitivity typically favor the shadow areas and look more washed out under bright conditions Try adjusting the image field so that more light areas are visible and see if the iris closes to improve the picture It is normal though that as the lighting conditions change throughout the day so will the camera iris and the p...

Reviews: