HMC
(
HOPF
M
ANAGEMENT
C
ONSOLE
)
SOFTWARE
8024GPS - GPS Sync Module - V02.00
19 / 76
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
3.5.4 Undo All Changes
Pushing the button
,
undo all changes
, will discard all eventually present changes that have
not yet been transmitted without reading the new state from the device.
3.5.5 Load a Configuration File
Pushing the button
,
load a configuration file,
starts a file-open-dialog for choosing a
configuration file to load into the device. This file must have been saved using the exact same
device driver, otherwise loading the configuration is going to fail showing an error dialog.
This file must have been saved using the exact same device driver.
3.5.6 Save the Current Configuration
Pushing the button
,
save the current configuration,
starts a file-save-dialog for defining a
target file to which the currently active configuration of the device will be saved for later loading
into the same or another device using the exact same device driver.
