HMC
(
HOPF
M
ANAGEMENT
C
ONSOLE
)
SOFTWARE
8024GPS - GPS Sync Module - V02.00
15 / 76
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
3.4
Create a serial-remote Connection to
hmc
software
After the physical connection has been established via the serial programming cable KA6870
between the Serial-Remote interface of the Sync Module 8024GPS and a free serial interface
on the PC, the PC COM port used must be set up.
The menu item
Devices / New
and the Button
in the tool bar both open the
New Device
wizard:
First, the Communication Channel to the device 8024GPS to be opened has to be defined as
RS232.
Forward
confirms the selection.
Configuration of computer's serial port with serial parameters (9600-8-N-1, like shown in the
screenshot).
Forward
confirms the selection.
