HMC
(
HOPF
M
ANAGEMENT
C
ONSOLE
)
SOFTWARE
8024GPS - GPS Sync Module - V02.00
17 / 76
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
3.5
Operation / Display
When the connected device is selected in the device tree, the
hmc
software main area shows
the configuration view of the connected device.
The configuration view is divided into functional tabs. Click on one of these tabs to navigate
through the board. The selected tab is identified by a darker background colour, see the above
image (tab "Time and date" in this case).
On top and to the right in the configuration view, there is a tool bar for reading and setting
device properties, as well as for loading and saving complete configurations.
Transmit changes to the device.
Read all configuration properties from the device. Changes not yet
transmitted may be lost.
Undo all recent changes without re-reading from the device.
Load a complete configuration from a file.
Save the current configuration to a file.
