Honeywell RM640, Handbook

Page: 98 / 184

6
OPERATION
98
RM640
www.honeywellprocess.com 34-VF-25-131 iss.1 GLO Feb 2019 US
C7.5.2 Cst. Length
C7.5.2.1 Text Enter a text (8 characters maximum) for the
custom length unit.
— Cst.
C7.5.2.2 Offset Enter an offset value. — 0.0 m
C7.5.2.3 Factor Enter a factor. Multiply the measured value
by this factor to change m (metres) to the
custom length unit.
— 1.0
C7.5.3 Volume The volume unit shown in Normal mode if
you made a volume table in the C3
Conversion menu. If you set this menu item
to "Cst. Volume" (custom volume unit),
enter values in menu items C7.5.4.1 thru
C7.5.4.3.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: setting: setting: setting: User
m
³
, L, hL, in
³
, ft
³
, gal,
ImpGal, yd ³ , bbl, bbl
(beer, US), Cst. Volume
m
³
C7.5.4 Cst. Volume
C7.5.4.1 Text Enter a text (8 characters maximum) for the
custom volume unit.
—
Cst.
C7.5.4.2 Offset Enter an offset value.
—
0.0 m
³
C7.5.4.3 Factor Enter a factor. Multiply the measured value
by this factor to change m
³
(cubic metres) to
the custom volume unit.
— 1.0
C7.5.5 Mass The mass unit shown in Normal mode if you
made a mass table in the C3 Conversion
menu. If you set this menu item to "Cst.
Mass" (custom mass unit), enter values in
menu items C7.5.6.1 thru C7.5.6.3.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting:
setting: setting:
setting: User
kg, t, lb, tn.sh., tn.l., Cst.
Mass
kg
C7.5.6 Cst. Mass
C7.5.6.1 Text Enter a text (8 characters maximum) for the
custom volume unit.
— Cst.
C7.5.6.2 Offset Enter an offset value. — 0.0kg
C7.5.6.3 Factor Enter a factor. Multiply the measured value
by this factor to change kg (kilogram) to the
custom mass unit.
— 1.0
C7.6 Factory Default C7.6 Factory Default C7.6 Factory Default C7.6 Factory Default
C7.6.1 Reset to Fact.
Def.?
If you set this menu item to "YES", the
device goes back to its initial settings (set by
the manufacturer in the factory).
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: setting: setting: setting: Expert
Yes, No No
1
If no value or parameter is specified in the customer order
2 "Lin. Distance" and "Lin. Level" are available if you created a linearized value table in menu C3 Conversion. "Volume" and "Ullage Vol-
ume" are available if you created a level-volume table in menu C3 Conversion. "Mass" and "Ullage Mass" are available if you created
a level-mass table in menu C3 Conversion.
Menu No. Function Function description Selection list Default