Honeywell RM640, Handbook

Page: 143 / 184

TECHNICAL DATA
8
143
RM640
www.honeywellprocess.com 34-VF-25-131 iss.1 GLO Feb 2019 US
Metallic Horn antennas with low-pressure flange connections: Dimensions in mm
Metallic Horn antennas with low-pressure flange connections: Dimensions in inches
Metallic Horn antenna versions with low-pressure flange connections
Figure 8-12: Metallic Horn antennas with low-pressure flange connections
1
Metallic Horn antenna with a low-pressure flange attached to a G threaded connection (ISO 228-1)
2
Metallic Horn antenna with a low-pressure flange attached to an NPT threaded connection (ASME B1.20.1)
INFORMATION!
•
The diameter of the outer sheath of the cable must be 7 … 12 mm or 0.28 … 0.47 ¨ .
•
Cable glands for cQPSus-approved devices must be supplied by the customer.
•
A weather protection cover is available as an accessory with all devices.
Horn antenna
version
Dimensions [mm]
a b c d Øe
G NPT G NPT
DN80/3 ¨ 151 215 247 262
1
452
1
509
1
75
DN100/4 ¨ 151 215 247 331
1
521
1
578
1
95
DN150/6
¨
151 215 247 486
1
675
1
733
1
140
DN200/8 ¨ 151 215 247 657
1
847
1
904
1
190
1
This is the dimension without the antenna extension option. A maximum of 10 antenna extensions are available. Each antenna exten-
sion is 105 mm long.
Horn antenna
version
Dimensions [mm]
a b c d Øe
G NPT G NPT
DN80/3
¨
5.94 8.46 9.72 10.31
1
17.79
1
20.04
1
2.95
DN100/4 ¨ 5.94 8.46 9.72 13.03
1
20.51
1
22.76
1
3.74
DN150/6
¨
5.94 8.46 9.72 19.13
1
26.57
1
28.86
1
5.11
DN200/8 ¨ 5.94 8.46 9.72 25.87
1
33.35
1
35.63
1
7.48
1
This is the dimension without the antenna extension option. A maximum of 10 antenna extensions are available. Each antenna exten-
sion is 4.1
¨
long.