manualshive.com logo in svg

Honeywell RM640, Handbook

Share
Download
Honeywell RM640 Handbook Download Page 61

 START-UP 

5

61

RM640

www.honeywellprocess.com

34-VF-25-131  iss.1 GLO Feb 2019 US

•  

Hold the bar magnet near to a keypad button.

i

The keypad button will operate. If you must operate the button more than one time, remove 
the bar magnet and then hold it near to the button again.

5.5  Remote communication with PACTware

™

PACTware

™

 displays measurement information clearly and lets you configure the device from a 

remote location. It is an Open Source, open configuration software for all field devices. It uses 
Field Device Tool (FDT) technology. FDT is a communication standard for sending information 
between the system and the field device. This standard agrees with IEC 62453. Field devices are 
easily integrated. Installation is supported by a user-friendly Wizard.

Install these software programs and equipment:

•

Microsoft

®

 .NET Framework version 2.0 or later.

•

PACTware.

•

HART

®

 converter (USB, RS232...).

•

The Device Type Manager (DTM) for the device.

You can download the latest version of PACTware

™

 and the DTM from our website.

Refer also to the PACTware Consortium site at http://www.pactware.com.

INFORMATION!

It is not necessary to remove the display housing cover to do this procedure.

Figure 5-5: Screen from the PACTware

™

 user interface

1  

DTM menu

2  

Information for device identification

3  

Installation parameters menu and menu items

Summary of Contents for RM640

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands