Honeywell NetAXS-123, User Manual, Page: 66 / 171

56 www.honeywell.com
Configuring via the Web Server
Maintaining Cards
To modify an access level
:
1. From the drop-down list in the Level field, select the number of the access
level you want to modify.
2. Make the desired modifications.
3. Click
Modify
.
To delete an access level
:
1. Select the number of the access level you want to delete from the drop-down
list in the
Level
field.
2. Click
Delete
.
3. Click
OK
at the prompt to delete the access level.
Caution:
When you create an access level for a panel in a loop configuration, you must
manually configure this access level at each panel in the loop. For example, suppose
you have three panels in a loop, and you add a Master Access level to panel 1 and you
configure readers 1-3 on panel 1 with this access level. When you save the access
level configuration at panel 1, the access level is automatically copied to panels 2 and
3. However, the readers at panels 2 and 3 are not yet configured. So you still must go
to panels 2 and 3 to assign the readers to the access level at these panels. To do this,
click on the desired panel, and configure that panel’s access level according to the
instructions in this section.
2.6 Maintaining Cards
A card is encoded with a unique number and the card holder’s access level grants
rights to access system resources. For example, in addition to its unique number, a
card would allow the card holder to be granted access to certain doors during a certain
time of day.
2.6.1 Adding New Cards
The Add New Card(s) screen enables you to:
• Create cards encoded with the following information:
– Card Number(s)
– Card Holder Name (first and last names)
– Card Type
– Personal Identification Number (PIN)
– Trace
– Expiration Date
– Use Limit
– Note 1
– Note 2
– Access levels