manualshive.com logo in svg

Honeywell NetAXS-123, User Manual, Page: 143 / 171

Share
Download
Honeywell NetAXS-123 User Manual Download Page 143

Downloading Data to the Panel

NetAXS-123 Access Control Unit User’s Guide

, 

Document 800-05168, Revision B

133

When the download/file transfer is complete, the panel reboots and the screen displays 
the following message: “This panel is now rebooting. Please wait at least 2 minutes 
for the reboot to complete.”

A.4.2  Downloading Data Later

Deferred downloads automatically transfer files to all panels in the loop. For deferred 
downloads, you can choose to activate the new firmware manually or have all panels 
in the loop activate the new firmware automatically (reboot) at a specified time in the 
future.

To set up a 

manually deferred

 download:

1. In the web server, select 

System Tools > File Upload/Download

 

to display the 

File Management screen (see 

Figure A-1

).

2. In the 

Download

 section, click 

Browse

 to locate the file you want to download.

3. When a file is selected, click 

Deferred

, then click 

Manual

, then click 

Download

. 

A confirmation prompt appears:

Summary of Contents for NetAXS-123












































































































































































Reviews:

No comments