manualshive.com logo in svg

Honeywell NetAXS-123, User Manual, Page: 133 / 171

Share
Download
Honeywell NetAXS-123 User Manual Download Page 133

File Management

Backing up and Restoring the NetAXS-123

NetAXS-123 Access Control Unit User’s Guide

, 

Document 800-05168, Revision B

123

To restore (or download) firmware automatically at a later date:

1. Click 

Browse

 to locate the firmware file.

2. Click 

Deferred

.

3. Click 

Automatic

. Time and date list boxes appear.

Figure 5-3:   

File Management Automatic Time Setting

:

4. Enter the specific date and time information. 

5. Click 

Download

. The download status is shown as “Activation scheduled for 

[month/day], [hr:min] [AM/PM]” . 

6. Click 

Activation Scheduled for <MONTH/TIME> 

when you are ready to download 

your files.

Note: 

Every panel has its own database, and each panel’s database must be 

backed up individually. For more information, see 

Upgrading NetAXS-123 

Firmware, page 129

.

To download a card database report (.CSV file) from the host system to the panel:

1. Click 

Browse

 to locate the .CSV file.

2. Click 

Download

 to download the file. If the file is in the correct report format, 

this message appears: “Would you like to append or replace the database? 
Access Control does not function while replacing a database, and updating 
may take several minutes.” If the file is not in the correct report format, a 
message states the error condition. 

If the database update is successful, this message appears: “Update Successful. 
Restarting Access Control.” If the database update is not successful, a message 
states the error condition.

Summary of Contents for NetAXS-123












































































































































































Reviews:

No comments