Honeywell NetAXS-123, User Manual, Page: 65 / 171

Configuring via the Web Server
Configuring Access Levels
NetAXS-123 Access Control Unit User’s Guide , Document 800-05168, Revision B 55
Click
Access Levels > Add/Modify/Delete
to display the Access Level Configuration
screen:
Figure 2-21: Access Levels > Add/Modify/Delete
In this figure, Door 1 has Reader A and Reader B enabled. Reader 2 and Reader 3 only
have Reader A enabled and Reader B is grayed out. Readers that are grayed out
indicate to the user that they are deactivated.
To create an access level
:
1. Select the door(s). The access level allows access only at the door(s) you select
here.
2. Enter the name of the access level in the
Name
field. This should be a unique
name that identifies the general user group.
3. Select the time zone you want from the drop-down list in the
Time Zone
field.
The access level allows access to the card holder only during this time zone.
4. Click
New Level
.
To assign a Time Zone to a door
:
1. Select the check box for the reader you desire. The Time Zone field appears.
2. From the Time Zone drop-down list, select the Time Zone you want to assign
to the door. Note that a Time Zone must be configured in Configuration > Time
Management before it appears in the drop-down list.