Honeywell NetAXS-123, User Manual, Page: 40 / 171

30 www.honeywell.com
Configuring via the Web Server
Configuring Time Management
Steps
: Use the descriptions in Table 2-4 to configure the time settings:
Table 2-4: Time > Current Time > Current Time Tab Fields
Setting Description
Current Loop Time Displays by default the current time setting in
day/month/date/hour/minutes/seconds. For example:
Fri Oct 30 07:16:27 2009.
Format
12 hour
– The 24-hour day is divided into two 12-hour
halves, AM and PM; each half is numbered 1-12.
24 hour
– The hours in the 24-hour day are numbered
consecutively 0-23.
New Date Specifies a new date to be the current date. Use the
drop-down lists to set the month and date, and click the
calendar icon to specify a different year.
New Time Specifies a new time to be the current time. Use the
drop-down lists to set the hour, minute, and AM or PM.
Geographic Time
Zones Select the geographic time zone in which the panel will
operate. The time zones are written in the [continent/city]
format. Find the appropriate continent, and then identify the
city with the closest longitude to the panel’s location. In the
United States, you might find these time zone associations
more familiar:
Eastern Time: America/New York
Central Time: America/Chicago
Mountain Time: America/Denver
Pacific Time: America/Los Angeles
Time Server Enter the IP address of the Time Server that the Gateway
will poll to update its time.
Enabled
– Select to enable the specified machine to be the
active time server.
IP Address
– Enter the IP address of the time server.
Update Interval
– Specifies the interval of time between
each automated synchronization. Recommended value is
once per day. The panel starts to update time as soon as it is
enabled and successfully connects to the Time Server; it
will continue to update according to the interval selected
from that start point.