manualshive.com logo in svg

Honeywell NetAXS-123, User Manual, Page: 150 / 171

Share
Download
Honeywell NetAXS-123 User Manual Download Page 150

140

www.honeywell.com

Upgrades to Gateway vs. Multi-drop Panels

5. Click 

Activate New Firmware Now

 to activate the new firmware. The system 

displays the following message box:

6. Click 

OK

 to activate the new firmware.

A.5  Upgrades to Gateway vs. Multi-drop Panels

You can upgrade multi-drop panels in the same way you upgrade the gateway panels 
via the web screen. 

1. Set DIP switch 6 to “ON.”

2. Connect directly to each panel via a Local Area Network or a direct-connect 

Ethernet connection.

3. Return the configuration back to a downstream panel once the upgrade has 

been successfully completed. 

Caution: 

You cannot have more than one gateway on a loop, so it is critical 

that you disconnect the 485 cables on the panel you are upgrading.

To perform the upgrade:

1. Before starting, make sure your panels are not buffered. If you have not logged 

in to the web pages lately, or WIN-PAK has not been connected recently, you 
should login and make sure you have current events coming in. This will 
ensure that the panels are not buffered, and you will not have to wait for the 
un-buffer to complete before starting. If you try to login and get “time-outs,” 
your panels are probably buffered and you should wait for them to complete 
their un-buffer before starting the upgrade.

Note: 

For WIN-PAK systems, we recommend that you stop the 

“communications server service” while upgrading, and then restart the service 
after your panels are upgraded.

2. Connect to your gateway panel using the instructions in 

Connecting to the Web 

Server

, 

page 3

. 

Caution: 

You cannot have more than one gateway on a loop, so it is critical 

that you disconnect the 485 cables on the panel you are upgrading.

3. Log in to your gateway.

Summary of Contents for NetAXS-123












































































































































































Reviews:

No comments