Honeywell NetAXS-123, User Manual, Page: 45 / 171

Configuring via the Web Server
Configuring Time Management
NetAXS-123 Access Control Unit User’s Guide , Document 800-05168, Revision B 35
Each Holiday added is considered a full day, extending from midnight to midnight.
The options available when configuring a holiday are Annual, Type, Date and Year.
While Annual is enabled, the date added as a Holiday will be a Holiday every year.
This disables the Annual check box and allows a user to select a specific year, so that
only during that date and year will the Holiday selection work.
While Annual is selected, the Year box is grayed out. The panel can support three
different Holiday Types (Type 1, Type 2, and Type 3), but a user can only select one
type per day. Also, note that a single calendar day cannot be set for more than one type
of Holiday. For example, the 4
th
of July could be a Type 1 Holiday, but then Type 2
and 3 would not be able to work on the 4
th
of July. Holidays or special events that
require multiple days will require a Holiday entry for each date that is to be special.
For example, Thanksgiving is usually two days, Thursday and Friday. Both of these
days would require a separate Holiday date entry and use the same Holiday Type.
Beyond that, Type 1, 2, and 3 can be configured any way you wish.
To modify a holiday
:
1. In the Holiday column, click the number of the holiday you want to modify.
2. Change the holiday settings as you desire.
3. Click
Modify
to accept the changes.
To delete a holiday
:
1. In the Holiday column, click the number of the holiday you want to delete.
2. Click
Delete
.
3. Click
OK
at the delete prompt.