Honeywell NetAXS-123, User Manual, Page: 43 / 171

Configuring via the Web Server
Configuring Time Management
NetAXS-123 Access Control Unit User’s Guide , Document 800-05168, Revision B 33
So, you need to add three time zones to the panel. Then, with the Link Time Zone
feature, you can link them so that they all work together:
1. Add Time Zone 2 and select Monday, Tuesday, Wednesday, Thursday, and
Friday. Enter a start time of 5:00 PM and an end time of 11:59 PM. Leave the
Link to Time Zone field blank.
2. Add Time Zone 3 and select Monday, Tuesday, Wednesday, Thursday, and
Friday. Enter a start time of 12:00 AM and an end time of 1:00 AM. In the
Link to Time Zone field, select Time Zone 2 to link Time Zones 2 and 3
together.
3. Add Time Zone 4 and select Saturday and Sunday. Enter a start time of 8:00
AM and an end time of 1:00 PM. In the Link to Time Zone field, select Time
Zone 3 to link Time Zones 2, 3, and 4 together.
Linked in this way, Time Zone 4 tells the NetAXS-123 system that it is also to use
Time Zone 3, and Time Zone 3 tells the system that it is to also use Time Zone 2.
Since Time Zone 4 is the “start” of this linked chain, it is the Time Zone that would be
operative for the Cleaning Crew Access Level. That is, the doors to which the
cleaning crew would have access would be assigned Time Zone 4. And, by assigning
them Time Zone 4, they would also have access during Time Zones 3 and 2—because
they are linked.
Note that in this example, Time Zone 2 is not linked to Time Zone 4. This is by rule.
Time Zone links should start on one end and stop at other. If you link the start of a
Time Zone chain to the end, you create a condition called a “circular interlock,” which
would cause your time zones to not function properly. The panel will send you a
warning, should you try to create a circular interlock.