manualshive.com logo in svg

Honeywell NetAXS-123, User Manual, Page: 126 / 171

Share
Download
Honeywell NetAXS-123 User Manual Download Page 126

116

www.honeywell.com

Monitoring NetAXS-123 Status

Monitoring Outputs

To monitor output status

: 

1. To energize an output for an indefinite period of time, click the 

De-energized

 

status button to display a prompt. Click 

OK

 to complete the change to 

“Energized.”

2. To de-energize an output for an indefinite period of time, click the 

Energized

 

status button to display a prompt. Click 

OK

 to complete the change to 

“De-energized.”

3. To Pulse an output for the configured period of time, click the 

Pulse

 button to 

display a prompt. Click 

OK

 to start the pulse. 

4. To reset the output to follow its configured time zone, click the 

Restore to Time 

Zone

 button to display a prompt. Click 

OK

 to restore the time zone. 

Note:  

The Output Status screen dynamically refreshes when the output status changes.

Summary of Contents for NetAXS-123












































































































































































Reviews:

No comments